Now remove the battery cables by removing the negative cable first. You can identify the positive and negative leads of the charger supply cable by using a multimeter. Pin On Car Is the risk of a spark real only with chargers that use more than 7-8ish ampere. . The red cable is the positive charge and should be clamped to the opposite side where the positive of the battery. Make sure the charger is off. All as far as I know modern cars use negative ground systems so the outer negative body is vehicle ground and positive center is battery. Connect the alligator clips. The center pole deep inside the bottom or back of the outlet is the positive pole while the metal shell or metal clips inside the socketon the sides of the outletform the negative pole. Its a serious problem in protection circuit of switchgear. Connect the positive Red cable from the charger to the positive post of the battery. Look for the mi...
Comments
Post a Comment